Das Ugly Stick plans 25" Wing Span
I had a request for a smaller stick to be powered by a .10 engine. We agreed on a 25" wing span. So here is the file, good for a 10 to 15 engine and pavement take offs or hand launching. Hmmm, why put on the landing gear? just dead weight anyway. Leave it off for and belly land in the grass.
Wing area 121 sq. in. Length 21".
The file will print a plan 36" wide by just 21" long.
I have heard horror stories about being robbed at the print shop, so lets look at the printing cost for this plan. Most shops charge 25 cents a square foot. This plan is under 6 square feet so the cost should be just a $1.50 plus sales tax. Shucks, at that price, you better print off a couple copies for friends at your flying field to purchase. $5.00 for your troubles would be a fair price for a printed copy.
File $5.00
Unique Stick plans
Build some thing unique and beautiful this season.
Build a Unique Stick. Designed with Dual Ailerons for an Ultra Fast Response and Ultra Reliability.
Don't just compete at a fun fly, Rule the SKY!
52" Wing Span. Engine .32 - .40
The Files will Print 2 sheets of plans 22" by 55" (56cm by 138cm).
Yes, your printer could enlarge this plan to suit your Engine.
These are high resolution TIFF files & PDF files containing 250 x 250 dots per inch.
Files $10.00
Das Ugly Stick 60" wing size
There's No Need To Fear! UNDERDOG is HERE!
NEW AND IMPROVED PLANS
11/15/06 I invested over 10 hours into improving these plans. The largest single improvement went into adding a fuselage side template. Many other imperfections where corrected, templates made, instructions written and improvements where made to make building this plane more fun and easier to assembly. These new plans are superior to the original plans and will allow you to build a plane that needs less trimming in flight. These improvements will provide the pilot with a far better, safer, more reliable plane under power or while dead stick landing.
It is with great pride that I introduce my Das Ugly Stick. Ever since the legendary Phil Kraft designed the Das Ugly Stik in the 60's, the familiar profile of the stick has been as common as a Cub at every flying field. Now you to can own the plans to Uncle Willies Stick and enjoy the fun of a "knock-around" general purpose sport plane with very little investment in building time and material. The greatest thing about a Stick is that it can be mild or wild, depending on the power plant.
And what a very rare find too. The original 30 - 40 year old plan had been rolled and carefully stored since being purchased in the 60s buy it's owner. This jewel was part of a 100+ plan trade.
Don't you be hood winked. Every plan I have EVER seen for sale are nothing but copies of copies of the paper plans that I used to sell many years ago. This is so true of every plan of the Ugly Stick that I have seen on Ebay.
The files will print 2 sheets 36" by 50".
Wing span 60". Wing area 720 sq. in. Length 52". Power .45 to .61
See a plane like this plane fly on Youtube
Files $10.00
Das Ugly Stick plans 60" to 120" ws
Having had requests for larger ugly sticks, I have already done the work for you as far as the plans go. As is, this plan would print my 60" wing span ugly stick. BUT, I have divided the plans into 18" wide strips. ALL you need do is to tell the printers to enlarge them by the % desired to get the wing span to fit your requirements. Example; 90 inches wing span is 90 divided by 60 = 150% increase in the Printing of the files. ABSOLUTELY DO NOT tell the printer that you want a 90" wing span! They will be lucky to have a high school diploma and you do not wish to tax their minds on simple mathematic equitation's. Their little hard drives (minds) will surely freeze up :-O
Power requirements are a simple rule of thumb for the stick. For ever inch of wing span added, allow .01 cc of motor. So, a 90" wing span would require a .90 or less. 120 inches wing span ( a 200% increase in printing) would require a 1.20 motor or smaller. Now what engine have you laying around gathering dust?
These plans use 5 files.
These are high resolution TIFF files containing 200 x 200 dots per inch.
The files will print 2 sheets 18" x 50" (Fuselage) and 2 sheets at 18" x 39.5" (Wings) and one at 36" x 10" (assembly instructions) which do not need to be enlarged.
All 5 Files $15.00
Big Stick
Big Stick
The Big Stick for that Quadra that you have laying around.
Files $15.00
|
|
